MTS-65 Miniature Linear Stage

Robust Design for Industrial Use

Travel ranges to 52 mm (2")
Repeatability to 0.1 µm
Load capacity to 1 kg

MTS-65, dimensions in mm

Direction of the axes and torques for linear stages

Very good travel accuracy and load capacity due to recirculating ball bearing guides. Precision ball screw. Stress-relieved aluminum base for highest stability. 2-phase stepper motor for high torque even at low velocities and high resolution Noncontact optical limit switches.

When carefully assembled, recirculating ball bearings are distinguished by a beneficial combination of high load capacity, lifetime, maintenance-free operation, and guiding accuracy. The moving part of the stages is supported by four preloaded linear ball bearing units which run on two guide rails. Each bearing unit is made up of two independent rows of circulating ball bearings.

Autofocus. Research. Biotechnology. Laser marking. Automation.

Download datasheet specifications

Datasheet

Version / Date

2020-09-22

pdf - 2 MB

Version / Date

2020-09-22

pdf - 2 MB

Version / Date

2017-09-22

pdf - 1 MB

Download

	621792x03	Unit	Tolerance
Active axes	X

Motion and positioning	621792x03	Unit	Tolerance
Travel range	13 / 26 / 52	mm
Design resolution	5 (full step)	µm
Minimum incremental motion	0.1	µm	Typ.
Unidirectional repeatability	0.2	µm	Typ.
Bidirectional repeatability	±5.0	µm	Typ.
Straightness	±1.0 / ±2.0 / ±3.0	µm	Typ.
Flatness	±1.0 / ±2.0 / ±3.0	µm	Typ.
Pitch	±40 / ±60 / ±80	µrad	Typ.
Yaw	±40	µrad	Typ.
Max. velocity	8	mm/s	Max.

Mechanical properties	621792x03	Unit	Tolerance
Drive screw type	Ball screw
Drive screw pitch	1	mm
Load capacity	10	N	Max.
Push/pull force	3	N	Max.
Holding force, power off	3	N	Typ.
Permissible lateral force	10	N	Max.
Permissible torque M_x in X	0.4	Nm	Max.
Permissible torque M_y in Y	0.6	Nm	Max.
Permissible torque M_z in Z	0.4	Nm	Max.

Drive properties	621792x03	Unit	Tolerance
Motor type	2-phase stepper motor
Operating voltage, nominal	24	V	Nom.
Operating voltage, max.	48	V	Max.
Step resolution	200	Full steps/rev.
Limit switches	Forked photoelectric sensor, N/C contact, 5V, NPN

Miscellaneous	621792x03	Unit	Tolerance
Operating temperature range	5 to 40	°C
Material	Anodized aluminum
Mass	0.4 / 0.6 / 0.8	kg	±5 %
Connector	HD D-sub 15 (m)
Recommended controllers	C-663.12 (single axis) SMC Hydra (double axis) C-885 with C-663.12C885 (up to 20 axes) ACS modular controller

Connecting cables for motor and sensor are not in the scope of delivery and must be ordered separately.

Download datasheet downloads

Datasheet

Version / Date

2020-09-22

pdf - 2 MB

Version / Date

2020-09-22

pdf - 2 MB

Version / Date

2017-09-22

pdf - 1 MB

Download

Documentation

Linear Stage

Version / Date

00.004 2019-12-03

pdf - 891 KB

Version / Date

00.004 2019-12-03

pdf - 848 KB

Documentation

Positioners with Electric Motors: DT-xx / HPS-170 / L-xxx / LS-xxx / MTS-65 / PRS-xxx / RS-40 / UPL-120 / VT-80 / WT-xx / WT-xxx

Version / Date

2.0.0 01/2020

pdf - 736 KB

Version / Date

2.0.0 01/2020

pdf - 749 KB

Download

3-D Models

zip - 2 MB

quote / order

Separate connection cable required for motor and sensor connection respectively.

Ask for a free quote on quantities required, prices, and lead times or describe your desired modification. All products available online can be ordered directly.

621792103

MTS-65 Miniature linear stage, 65 mm width, 2-phase stepper motor, 13 mm travel range, optical limit switches

Add to quote list Remove from quote list

621792203

MTS-65 Miniature linear stage, 65 mm width, 2-phase stepper motor, 26 mm travel range, optical limit switches

Add to quote list Remove from quote list

621792303

MTS-65 Miniature linear stage, 65 mm width, 2-phase stepper motor, 52 mm travel range, optical limit switches

Add to quote list Remove from quote list

Ask for custom design quote list